Locate the USB cable that connects the receipt printer to the computer.
Plug the power cord into the back of the printer and a power source. Connect the square end of the USB cable to the printer. Connect the rectangular, slimmer end of the USB cord to your computer. Turn on the printer, using the switch on its side. Your computer will automatically install the driver. To install manually, follow the prompts as explained in Part 4 below. If you see a red error light flashing, load paper Part 3 before you begin installing. Part 2: When the paper runs low, your printer's red error light will begin to flash, and the receipts will print with a pink line down the middle of them.
To load more paper: Press the open lever on the cover of the printer. Gently push the roll into place until it is touching the lower black button. If the lower button is not depressed by the paper roll, the error light will flash. The paper gauges are fragile.
Star TSP100 ECO Receipt Printer From Point Of Sale Warehouse Canada
If they become detached, then you'll need to take the printer apart in order to reattach the gauges. Do not try to feed the paper through the front rollers on the cover. The correct way to load the paper is to make sure the paper comes out from underneath the roll as if you were loading a roll of toilet paper under instead of over. Pull the paper feed out of the printer. With the paper feed hanging out the front of the printer, close the cover by pushing it down onto the paper until it clicks.
Turn the printer on. Part 3: Hold down the Feed button on the front of the printer. While you're holding down the Feed button, turn the printer on. Release the Feed button as the printer begins printing a receipt with its settings. If a receipt with settings was printed, then your printer is working correctly. Part 4: Turn your printer on using the switch on the side, and follow the steps below to manually install the driver. If you have already installed the driver, skip to Part 5. Click here to download the zip file that contains the drivers to your Mac.
Once the file is downloaded, open the. Open the Driver file, and click on the installation file called starcupsdrv. Under CUPS 3. Follow the prompts for installation. You'll see the following: Part 5: Check to make sure the pop-up blockers on your computer have been turned off by opening Preferences from the apple menu in the upper left of your screen. Firefox settings: Turn off the pop-up blocker. Safari settings: Add the printer and set it as the default printer: Go to System Preferences. You will need to enter the administrator password for the computer.
Run usbtb After it is mounted, double-click usbtb. If you are asked about searching for USBTB devices, you can cancel or skip that part of the install process. Continue the rest of the process with the default settings. Run starcupsdrv Reboot your computer. When the computer is done loading, turn on your receipt printer. In the list of printers, click TSP with connection usbtb. Select the TSP with the Location set to Directly attached via usb and clear it for the menu column.
This printer is automatically added by OSX but will not work. This prevents you from accidentally selecting the incorrect printer. Windows 7 Before you power on your TSP receipt printer, download the drivers and extract them. Click Start , right click My Computer and select Properties. In System Properties , click Device Manager. Power on the TSP receipt printer.
- clean my mac 2 ita download?
- Setting up a Star TSP100 (USB and LAN) on your computer (MAC or Windows)?
- Related Articles.
On the Update Driver Software page, click Browse my computer for driver software. Browse to where you downloaded the driver folder and choose the 32 bit or 64 bit folder , depending on the version of Windows 7 you have, and click Next.
- Star Global Support Site!
- Thermal Receipt Printer -TSP 100 (143) for Mac OS (Leopard, Snow Leopard, Lion, Mountain Lion).
- TSPIII series | STAR MICRONICS CO.,LTD!
The printer is now installed and you can configure your printer for use with LightSpeed Retail. In Devices and printers , right click the Star printer and select Printing Preferences. At the bottom of the Printing Preferences , click Advanced. Set the paper size to 72 x Receipt and press OK twice to return to the printer properties window. Click Device Settings: It can take up to 10 minutes to download. Extract the file and run the installer for your 32 or bit OS. Click Next through all the install prompts. When the install is complete, plug your printer in. Turn it on and see if the computer recognizes it.
Right click the Star printer and select Printing Preferences. Click Advanced , set the paper size to 72 x Receipt and click OK to return to the printer properties window. Right click the Star printer and select Printer Properties. Click Preferences , set the paper size to 72 x Receipt and click OK to return to the printer properties window.
Mac OS X Plug the power cord into the printer and wall. Hold the feed button and power the printer on while continuing to hold the button until two pages print. Keep the one that says Current IP Parameters near the bottom. Get the driver either from online or the installation CD.
- install mac os x 10.4 on external hard drive!
- Star Global Support Site.
- microsoft access database for mac.
- mac os 10.4 install disk.
- enable remote desktop windows 7 from mac!
Open the Mac folder and then the Cups folder. Double click starcupsdrv zip and unzip it. To download the driver from the Internet: Go to the Star Micronics site. Open your downloads folder and click the starcups driver. Click the Driver folder and unzip and install the starcups package.
Ask a Star Expert
Select a result that matches and click Add. Windows Connect one end of the ethernet cable into the back of the printer and the other end into your router.
Power the printer on, insert the installation CD and run Autorun. If you do not have the installation CD: Right-click the driver file and select Extract All. Navigate to the file, click Autorun.
Star Global Support Site
If a Windows Firewall notification appears, click Allow Access. Click Advanced button and set the paper size to 72 x Receipt. Click OK to return to the printer properties window. Click Device Settings. Configuring printer settings Choose the operating system you use.