Install new mac os x new hard drive

Once Disk Utility is open, select the View button on the upper left of the window and select Show all Devices. If your drive does not show in the sidebar, quit Disk Utility and then reselect it from the menu. The name can be anything you want, but should be a different name from the startup drive being replaced.

STEP 9a. For those using Once the drive is formatted you can opt to select Restore from Time Machine. This method allows you to restore the OS and your user information back to the drive. Once this process is complete you can skip to Step STEP 9b. Once you've formatted the drive, you can close Disk Utility. If you're in In earlier OS versions, quitting Disk Utility will take you back to the installer. Follow the steps as they are presented, making sure to select the new drive the one you just formatted in the previous step as the install location.

The OS installers are simple to use; all you need to do is follow the on-screen prompts. Once you have filled in the required information, the installation will begin. This can take quite a while, depending on your internet connection speed. Fortunately, the process at this point is automated, so you can do something else while waiting for the install to complete.

STEP Once the OS has been installed, your computer will restart to the new drive and walk you through the final setup steps. This part of the setup process uses Apple's built-in Migration Assistant utility. The Migration Assistant will scan for available drives, showing you a list. Select your drive once it appears, then click 'Continue'.

The next screen will list the data types you can transfer. Select any users you want to bring over to your new drive, as well as any applications and network settings. There is an option for 'Files and Folders' which you will likely want to copy over as well, since some applications install some settings in non-standard places. Once you have selected the items you would like to copy to your new system drive, click the 'Transfer' button. Depending on how much data is being is being copied, this may take a while.

After Migration Assistant finishes you can continue the rest of the process.

Step 1: Troubleshoot the Device

This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community. Sorry, there was a problem flagging this post.


  • best snap app for mac!
  • mac mini early 2009 max memory.
  • pc style keyboard for mac;
  • .
  • kitchen design software download mac.
  • vnc mac screen sharing windows?

Please try again now or at a later time. Disruptive posting: Flaming or offending other users Illegal activities: Promote cracked software, or other illegal content Offensive: Sexually explicit or offensive language Spam: Advertisements or commercial links. Track this discussion. Thread display: Ask Question. Howard Zack Howard Zack 61 1 1 3. For people looking to reinstall If so, you can use Migration Assistant to move over user settings and data from the external backup hard drive I'm assuming it's a Time Machine backup.

How to Migrate Your Mac's OS and Your Data to a New Drive

Migration Assistant is located under Applications: Migration Assistant. Does the new HD count as a 'new computer'? Its saying only to use time machine back up to restore to computer that was source of back up. Or if new computer use Migration assistant Multiple answers refer to 3rd party sites on how to create a bootable USB drive with macOS installer. Commenting to note there's an official tutorial available , too. Here is the process I followed: Things you'll need: Be sure to get one with external power source. I've had little to no success with USB powered devices. T8 Mini Torx screw driver Small phillips screwdriver Recommend: A cold beer and a lot of patience Just in case you pull off the rubber coating, you'll need a case removal tool like you use to replace a cell phone screen.

After you've selected a language preference, Select the Disk Utility item in the list of utilities.

How to install os x in new HDD - Apple Community

Select your drive on the left navigation panel It's probably already selected Click the Verify Disk button in the Disk Utilities. It will probably show some erros. Click the Repair Disk button that will only appear after you click Verify. Do this until there are no errors or like me you receive a message saying that the disc couldn't be repaired.

MacOS Install Secret Trick - How to install Mac OS High Sierra NEW SSD Clean MacBook Pro 2010-2018

Click the Verify Disk Permissions button. If you didn't receive a nasty message on step 5 saying the Disk was corrupt, to back up your files and such, good on ya! Try some Canadian troubleshooting -- When in doot doubt Reboot! Step 2: Removing the Hard Drive from the Mac Here's a great visual guide to the steps below: Remove the hard drive from the device by removing the 8 screws from the bottom of the MacBook and pulling off the bottom cover, being careful not to pull at the edges as it will pull off the rubber coating.

If you accidentally do this, tip to follow. To pull the cover, put your fingers at the hinge of the MacBook screen from the bottom , and lift from the metal part under the rubber cover. You will see a small black bar held down with two screws right next to the hard drive. This must be removed before the hard drive is pulled out.

If your hard drive is OEM, there should be a plastic tab that you gently pull on to lift the hard drive, being cautious of the SATA cable Pull gently at the cable connector seated in the end of the hard drive facing the exterior of the case to disconnect the hard drive. If you messed up and pulled off the rubber coating: GENTLY slip the edge of the case removal tool under the edges of the rubber coating with the edge of the tool facing towards you and lift the edge back over the edge of the metal backing. Slowly glide the tool around the edge, lifting the rubber back into place, being extra cautious around the corners.

Put the back plate down and don't breathe on it or the rubber stuff will come off again. Step 3: There will be two cables to plug in and they are directional. The smaller plug is the data cable that goes into the rectangular USB connector.

How to reinstall macOS from macOS Recovery

The other goes to the power cable. If you bought the same one I did, there is a connector that adapts the standard power supply connector to SATA. There is a power switch on this cable.


  • .
  • ;
  • Reinstall from macOS Recovery.
  • download adobe lightroom 4 full version for mac?
  • play worms 3d online mac;
  • instalar windows 7 en mac mini sin bootcamp.
  • Mac OS X Installation Basics SATA Drive | Seagate Support ASEAN?

You should hear the device chime in Windows, or you can verify that the device driver was recognized and installed in Device Manager. You will not see it show up as a hard drive as the Mac drive format is not diurectly compatible as a disk drive with Windows. I selected the Select a Device radio button and in the Detected Devices drop-down and click Load Select the files and folders you wish to back up in the tree to the left just like you would any Explorer or Finder for you Mac peeps tree, then click Extract.

Follow the prompts to extract the files to the desired location. You will have to babysit it because there are a lot of Mac file names that are not OK on Windows. I used the "Auto-Rename" feature and it worked swimmingly.

Apple Footer

Step 4: Install the NEW hard drive back into Mac. Before you do this, there are a couple of screw-in pins that are in the sides of the old hard drive that you will need to hold your new hard drive in place.


  1. Mac OS X Installation Basics SATA Drive.
  2. Helpful answers.
  3. Installing Mac OS on a new HDD Hard Drive!
  4. How do I install a new MacOS on a new hard drive?.
  5. two monitors mac mini hdmi?
  6. visual studio express for mac download!
  7. imprimer en noir et blanc mac os x.
  8. Use the T8 mini Torx screwdriver to remove them and place them into the sides of the new drive. These will hold your new drive in place. Put a couple of screws on opposite corners of the bottom plate to hold it in place and protect all the precious bits in there. This should come out clean Click the Erase option in the Disk Utility and complete a format of the hard drive using the Mac OS Extended Journaled option If you like, partition the drive using the Partition option and set the number and size of partitions to the desired size.

    Exit the Disk Utility tools using the menu in the upper-left In the recovery menu, click the Reinstall OSX option If you are prompted to connect to a wireless network, you can either connect it to an ethernet cable to speed things along, or click the Wireless icon in the upper-right of the top toolbar to search for an SSID to connect to. This will permit you to use the online recovery options to download the operating system.